Computer Controlled Sounds, Lights and Irrigation
Use Time Sentinel to schedule times
and play sounds using the computers sound card. Suitable for lunch or school
break alarms. Sentinel definition -
Protector, Defender or Guardian
Plays sounds, songs and wav files via the computer with ON, OFF
and Auto modes.
User friendly software.
Save
money
with easy software compared to expensive systems.
8
Programs available
with 10 schedules each. 1-80 schedules per day
Easier to program than traditional controllers
and timers
Download

Purchase Time Sentinel



Also we have timing
software available to control devices using solenoids and relays that are suitable for lights, drippers, aquaponics, pumps, bells, time clocks,
sprinklers, water, hydroponics and irrigation
or anything that needs to be turned On or Off. Download free, 30 day trial software.
Timer is the perfect timing software for computer control hydroponics, relays, solenoids or lights from a computers printer/parallel port.
This program enables the PC to connect to the outside world by using the
parallel or printer port LPT1.
To control via the USB or serial ports, see Serial
Timer and Serial Timer USB
software below.


Timer Version
5.0.12 offers the following benefits and features:
-
Controls in real time via computer with ON, OFF
and Auto modes.
A click of the mouse and your sprinklers can be watering, turn a light on, the options are endless.
-
User friendly software.
-
Save money with unbreakable software compared to expensive timer controllers.
Connect an old computer with a relay card, a few solenoids and a printer
cable to end the frustration of timers.
-
24 channels/zones available.
Access to 39 channels (24 outputs and 15 inputs)
-
Easier to program than traditional controllers
and timers
-
Save on water and power bills.
Be able to fine tune the exact amount of time a solenoid or relay turns on
or off saving you valuable water and power.
-
24 hour cyclic timing range with day scheduling using 1 second to 12 hour switching for ON times.
Timer can take control of Ventilation, Pumps, Heating and Cooling, and Light Cycles (e.g. 16-18 hrs light, 6-8 hrs dark) depending on your needs.
-
Renewal options available for short term use of
6 to 12 months..
Hardware can then be connected to the computer by Radio
control (100m) or cable to control watering, hydroponics, security lights, gardening and home automation using solenoids, relays and sensors.
The registered version allows you to control up to 24 channels, outputs via 3 printer ports.
Being user friendly this application puts the user in a powerful position of operating
any device set by time and day, with On, Off or Auto modes.
3 Things you can find out about Timer
-
Take a look at the screenshots for the 7 available timing
programs below.
-
Discover the most suitable program for your needs by
clicking the
More info button.
-
And lastly, download the free 30 day trial version.
Downloads for Parallel,
Serial and USB ports:
Timer v5.1.0.1
Timing software for home automation, to control irrigation, hydroponics, lights
etc. Timer v5.1.0.1 is the basic version suitable for most domestic users. This is
a program that enables the PC to connect to the outside world, by using the
printer port LPT1. For domestic, commercial or industrial use.
Win XP, NT, 2000,
Win 7, 8 & 10.



Timer (pulses in seconds)
Same as Timer program with additional pulse timer in seconds on each output form. Has also Master control on Main form. Access to port 378 or LPT1 only. For
commercial or industrial use. Designed for irrigation and hydroponics although
can be used for any application.



Timer (pulses in minutes)
Same as Timer program with additional pulse timer in minutes on each output form. Has also Master control on Main form. Access to port 378 or LPT1 only. For commercial or industrial use.
Designed for irrigation and hydroponics although can be used for any
application.



Timer
(Multiple Switchings)
Same as Timer program with additional pulse
timer in minutes on each output form. Has also Master control on Main form. All
outputs (channels) can have up to 10 switching times. Access to port 378 or LPT1
only. For commercial or industrial use. Designed especially for school bell, lunch break
or factory bell system
software. Can be used in any application of controlling devices.



Timer (Multiple Switchings_3 Ports)
Same as the above program but of a higher class, that controls 3 parallel ports
at the same time. Suitable for domestic, commercial or industrial use. Can control with
parallel port PCI-bus cards from places like
ByteRunner or a normal parallel and printer port. Also can be
used for any application of controlling devices. For any serious application
that needs reliability of straight through pin to pin cables or port to relay,
instead of serial communication software and hardware.
Win XP, NT, 2000,
Win 7, 8 & 10.


Serial Timer
Use Serial timer to easily communicate with external appliances on an RS232 connection.
Serial timer has powerful features similar to the timer software that Work with all types of serial ports, including USB adaptors, Wireless Device Servers or any virtual port.
This program is especially made to communicate with the k108, 108, CK1610 and
k108 multi drop relay boards via serial connection.



Serial Timer
USB
Similar to the above program that can communicate with external devices on an
USB connection. Suitable for domestic, commercial or industrial use. Serial
Timer USB has powerful features similar to the timer software that work with all
types of serial and USB ports, including USB adaptors, Wireless Device Servers
or any virtual port. This program is especially made to communicate with the
Arduino or
Pencom USB relay boards, or the
k108, 108, CK1610 and
k108 multi drop relay boards via serial connection.
Please contact us for more information

Example video of using the software Timer (Multiple Switchings)
to control equipment from a solar tracker to aquaponics.

|